Home » Products
  • W156 5-Ton Wheel LoaderThis W156 wheel loader is able to bear 5 tons of nominal load. Its bucket capacity ranges from 2.5 to 3.6m3. With the prolonged wheel base of 3427mm and the larger bucket cylinder, this product comes with great breakout force and excellent stability. The optimal steel material with outstanding intensity and tensile property is utilized to design and make the structural frame and operation devices. The finite element analysis is accomplished through the ...
  • W136 3-Ton Wheel LoaderThe rated load of the W136 wheel loader is 3 tons and the bucket capacity ranges from 1.8 to 2.2m³. Our product comes with excellent structural hardness and enough space for maintenance because of the large interval between articulations of frames. It adopts the optimal steel materials with strong intension and tensile performance to manufacture the structural frames and operation devices in our design that proves to be reasonable through the computer finite element analysis.
  • W153 5-Ton Wheel LoaderThis W153 wheel loader works with 5 ton rated load and the middle sized wheel base is about 2920mm. Working with smaller turning radius than the W156 product, it is more flexible in the narrow and small places. Aside from the bucket with the capacity ranging from 3 to 4m³, this machine also adopts the strengthened rear frame and heavy counterweight equipment to keep its stability.
  • W136II 3-Ton Wheel LoaderThe W136II wheel loader is the reformative achievement of W136 product. Similar to the W156 machine, it adopts the ZL50 planet type gearbox. Our product gets stronger power from the larger gearbox. With the strengthened rear frame, this product is the matched product for heavy duty machine.
  • W218 1.8Ton Mini ExcavatorThis W218 mini excavator can withstand 1.8ton rated load, equipped with a 0.05m³ bucket, swing boom, dozer, rubber track and canopy in standard. It is powered by the famous Perkins engine with ample 14.7kw power. Moreover, this product also utilizes the Nachi hydraulic pump and swing motor, Comer brand travel motor and Valvoil main valve in the quality hydraulic system. It is extensively used in urban construction and repair, farm or garden constructions.
  • W235 3.5Ton Mini ExcavatorThis W235 3.5ton mini excavator is equipped with a bucket, whose capacity is 0.12 cubic meters. It also utilizes the original Yanmar engine, the KYB hydraulic system and an air conditioned cabin that creates the comfortable operation environment. Additionally, the standard configuration includes the rubber track, swing boom, dozer, etc. With strong power and high efficiency, the machine makes the operators feel easy to accomplish the job without pressure.
  • W265 6-Ton Crawler ExcavatorThis W265 small excavator is a competent machine for holding 6ton load. It is configured with a 0.25 cubic meter bucket, original Yanmar engine, KYB hydraulic pump and main valve. With large digging force, this machine saves much time in a working cycle. Under the smooth ergonomic control, it makes comfortable operation with the integral auxiliary devices and swing boom. In the quiet and capacious cabin, operators get less fatigue.
  • W285 8.5-Ton Crawler ExcavatorThe W285 8.5ton crawler excavator adopts the original Japanese Yanmar engine with a low noise and low fuel consumption. Meanwhile original Toshiba hydraulic pump and valve are also equipped to our product ensuring the reliability of the whole machine...
  • W2150 15-Ton Crawler ExcavatorThe Kawasaki hydraulic pump with large displacement offers affluent power for the machine to work effectively. In addition, our machine chooses the Parker valve, Doosan travel motor and Sungbo swing motor to match the pump perfectly. This quality economic machine is extensively applied in the urban construction and buildings.
  • W2215 21-Ton Crawler ExcavatorThe W2215 excavator is configured with the noted original ISUZU engine, Kawasaki hydraulic pump, Parker main valve, Doosan travel motor and Sungbo swing motor. With the 0.9cbm bucket, it is able to be loaded with 21.4ton. Moreover, this machine is mounted with a 600mm wide track. Under the power of the 113.2kw, the engine is totally matched with the hydraulic pump, ensuring the smooth operation and efficient performance of the machine.
  • W2245 24-Ton Crawler ExcavatorThe W2245 24ton excavator with a 1.1m³ bucket gets 128.5kw power supplied by the original ISUZU engine. It uses the quality hydraulic system that is constituted by the Kawasaki hydraulic pump, Parker main valve, Doosan travel motor and Sungbo swing motor. The extendable undercarriage makes the machine more stably. Furthermore, our product selects the luxury cabin with Japanese Denso air conditioner and safe air seat.
  • W2330 33-Ton Crawler ExcavatorOur product is supplied with a variety of optional working tools, such as the hydraulic breaker, steel grapple, log grapple, compactor, ripper and shears. Users can enlarge the versatility and performance of the machine through adding these auxiliary tools to finish different tasks in various construction sites.
  • W2360 36-Ton Crawler ExcavatorThis W2360 36ton excavator is a large size machine with 1.6m³ bucket. It introduces the American original Cummins engine that offers the ample power as 186kw. Due to the Rexroth hydraulic pump, main valve and travel motor, this machine gets enough hydraulic power. Both the upper and lower frames are strengthened to enhance the stability and durability. Moreover, the cabin is mounted with a steel safety guard that gets the machine adapt to the mining ...
  • W2425 42Ton Crawler ExcavatorIt is activated by the strong power as 239kw supplied by the original ISUZU engine. Meanwhile, this product also introduces a series of optimized hydraulic systems like the Rexroth hydraulic pump, main valve, swing motor and Toshiba travel motor. Additionally, a large operator station is mounted atop the undercarriage, offering enough space, wide view range and easy approach to the switches. All mentioned above is the valid evident for that operators will enjoy ...
  • C-Frame Fixed Bolster Power PressOur machine is designed with the steel welded body that includes the rigid frame with less deflection. Aside from the high torque and low noise wet clutch unit, it is also configured with precise transmission gears and rigid crank to keep long service life and high accuracy. The forced lubrication system with default monitor enables the product to run reliably. Due to the user-friendly design and multifunctional electric control system ...
  • C-Frame Double Crank Power PressThis machine chooses the six faced rectangular guide rails so as to enhance the punching precision. It also gets double crankshafts laid in the front and rear parts respectively connected to the slide via two link rods successfully. The reverse movement of the crankshaft increases the synchronization of the slide. In addition, the press is designed with the capacity ranging from 110 ton to 315 ton.
  • H-Frame Double Crank Power PressThis JW36 straight side double crank press is designed with a strong H frame. The enclosed wet clutch with high torque needs minimal maintenance and it can get ride of the noise and pollution caused by airborne particles, significantly extending the lining life. Our machine is structured by symmetrical front and rear columns, minimizing the deflection so as to suit the precise progressive die applications. Without inherent deflection on angle, the structure ...
  • C-Frame Inclinable Power PressThe J23 C frame inclinable mechanical press is an ordinary punching machine with the capacity ranging from 6.3ton to 125ton. Aside from the body, slide and the worktable made of casting steel, this machine also adopts the rigid rotary bond clutch that comes with simple maintenance.Due to the helical gear transmission, the machine is improved on the noise reduction and stable performance. In addition, it makes use of the balance cylinders that add ...
  • JH23 C Frame Inclinable Pneumatic PressThis JH23 C frame inclinable pneumatic press is one of the optimized version of J23 machine. Equipped with a pneumatic clutch, the machine supports three working modes, namely the inches mode, single stroke and continuous strokes. The capacity of the machine ranges from 10ton to 100ton.
    When the machine needs to stop emergently, operators can press the specialized button ...
  • J21S C Frame Deep Throat PressThis J21S C frame deep throat press works with four times deeper throat than the common machine. It has a large enough worktable to finish the forming in one punching cycle without turning. This machine is commonly used to process the large piece of plates.
    Our machine’s body is welded with steel plate so that it owns enough strength and high rigidity. This product is also equipped with the hard rotating key type clutch that offers easy operation...
  • H-Frame Double Crank Punch PressApart from the same parts as the JH25 C frame double crank press has, this JH36 semi straight side double crank press also adopts the wet type clutch and brake, D frame that has a stronger welded body than the C frame.
  • JS36 Straight Side Two Point PressThis JS36 straight side two points press utilizes a dry type clutch and brake, a steel welded framework with cross beam and column. Through taut bolts, the base is tightened and combined into an integral body. Due to herringbone gear transmission, this machine generates low noise and working impact. The slide moves with the eight sided orthogonal guide rail or four sided guide rail reclining at 45 degree. If equipped with the movable worktable, the product offers higher working efficiency.
  • Swing Beam ShearThis QC12Y swing beam shear is constructed by the welded steel frame and the swing type blade carrier, both of which are processed with the high temperature treatment to release the stress. Driven by the left and right hydraulic cylinders, the blade carrier will swing with the support shaft. The machine uses the nitrogen cylinder to accelerate the back stroke operation. Aside from the back gauge that is a mechanical adjuster with display and manual adjusting lever ...
  • Guillotine ShearThis QC11Y guillotine shear is a hydraulic machine that is equipped with a welded steel blade barrier positioned by guide rails with rollers. By means of removing the spacing of the guide rails, this machine is significantly improved on its cutting precision. Moreover, the shearing angle can be adjusted in accordance with the thickness of the materials, realizing high efficiency. The cutting stroke changes with the length of the materials.
  • Hydraulic Press BrakeThis WC67Y hydraulic press brake is designed with the C frame steel welded body that is treated with high temperature to release the stress so that the product is enhanced with the the rigidity and the strength.Aside from the mechanical synchronous control system with torsion axis, this product also adopts a wedge compensation device.
  • CNC Hydraulic Press BrakeThe WE67K CNC hydraulic press brake has an option of Delem DA52 NC system and DA56 system. It employs the electro hydraulic servo synchronous manifolds with the grating to make the control system in a closed loop. There are three automatic hydraulic cylinders for deflection compensation with the control of CNC system on the amount of added convex. Our product employs the wedge device on the upper mould mounting plate ...
  • WM CNC Press BrakeThis WM CNC press brake is a kind of hydraulic up stroke product that is available in processing large accessories. It utilizes the center pressure system to avoid the center sags. Configured with the bearing and roller guide, this product is able to prevent the ram from working in a curving way. Moreover, the stroke is controlled precisely. Equipped with the Japan NC9 CNC system, this press brake shows slow bending performance.

World Machinery is a professional construction machinery and metal forming machinery manufacturer in China. Our products include crawler excavator, wheel loader, hydraulic shear, mechanical power press, road roller, and more.