Mechanical Power Press

Punch Press, Pressing Machine
Home » Products » Metal Forming Machinery » Mechanical Power Press (Punch)
  • C-Frame Fixed Bolster Power PressOur machine is designed with the steel welded body that includes the rigid frame with less deflection. Aside from the high torque and low noise wet clutch unit, it is also configured with precise transmission gears and rigid crank to keep long service life and high accuracy. The forced lubrication system with default monitor enables the product to run reliably. Due to the user-friendly design and multifunctional electric control system ...
  • C-Frame Double Crank Power PressThis machine chooses the six faced rectangular guide rails so as to enhance the punching precision. It also gets double crankshafts laid in the front and rear parts respectively connected to the slide via two link rods successfully. The reverse movement of the crankshaft increases the synchronization of the slide. In addition, the press is designed with the capacity ranging from 110 ton to 315 ton.
  • H-Frame Double Crank Power PressThis JW36 straight side double crank press is designed with a strong H frame. The enclosed wet clutch with high torque needs minimal maintenance and it can get ride of the noise and pollution caused by airborne particles, significantly extending the lining life. Our machine is structured by symmetrical front and rear columns, minimizing the deflection so as to suit the precise progressive die applications. Without inherent deflection on angle, the structure ...
  • C-Frame Inclinable Power PressThe J23 C frame inclinable mechanical press is an ordinary punching machine with the capacity ranging from 6.3ton to 125ton. Aside from the body, slide and the worktable made of casting steel, this machine also adopts the rigid rotary bond clutch that comes with simple maintenance.Due to the helical gear transmission, the machine is improved on the noise reduction and stable performance. In addition, it makes use of the balance cylinders that add ...
  • JH23 C Frame Inclinable Pneumatic PressThis JH23 C frame inclinable pneumatic press is one of the optimized version of J23 machine. Equipped with a pneumatic clutch, the machine supports three working modes, namely the inches mode, single stroke and continuous strokes. The capacity of the machine ranges from 10ton to 100ton.
    When the machine needs to stop emergently, operators can press the specialized button ...
  • J21S C Frame Deep Throat PressThis J21S C frame deep throat press works with four times deeper throat than the common machine. It has a large enough worktable to finish the forming in one punching cycle without turning. This machine is commonly used to process the large piece of plates.
    Our machine’s body is welded with steel plate so that it owns enough strength and high rigidity. This product is also equipped with the hard rotating key type clutch that offers easy operation...
  • H-Frame Double Crank Punch PressApart from the same parts as the JH25 C frame double crank press has, this JH36 semi straight side double crank press also adopts the wet type clutch and brake, D frame that has a stronger welded body than the C frame.
  • JS36 Straight Side Two Point PressThis JS36 straight side two points press utilizes a dry type clutch and brake, a steel welded framework with cross beam and column. Through taut bolts, the base is tightened and combined into an integral body. Due to herringbone gear transmission, this machine generates low noise and working impact. The slide moves with the eight sided orthogonal guide rail or four sided guide rail reclining at 45 degree. If equipped with the movable worktable, the product offers higher working efficiency.

The power press is a kind of mechanical punching equipment. It is mainly structured by the body, slider, crankshaft, link rod, clutch, flywheel, transmission gear, electric control system and main motor. Aided with different moulds, the machine has a variety of applications covering punching holes, blanking, cutting, stamping, drawing, bending, forming, etc.

The power press is popularized in auto parts, home appliance, hardware, mobile, electronics and other industries. We supply a range of products with varied capacity ranging from 6.3 ton to 1000 ton, such as the C frame single crank press, C frame double crank press, straight side double crank press with H frame, etc. All of them are featured by high precision and reliability.

Other Products
  • Guillotine ShearThis QC11Y guillotine shear is a hydraulic machine that is equipped with a welded steel blade barrier positioned by guide rails with rollers. By means of removing the spacing of the guide rails, this machine is significantly improved on its cutting precision. Moreover, the shearing angle can be adjusted in accordance with the thickness of the materials, realizing high efficiency. The cutting stroke changes with the length of the materials.
  • Hydraulic Press BrakeThis WC67Y hydraulic press brake is designed with the C frame steel welded body that is treated with high temperature to release the stress so that the product is enhanced with the the rigidity and the strength.Aside from the mechanical synchronous control system with torsion axis, this product also adopts a wedge compensation device.