C-Frame Double Crank Power Press

Power Press with Double Crank, Double Crank Punching Machine
Home » Products » Metal Forming Machinery » Mechanical Power Press (Punch) » C-Frame Double Crank Power Press
C-Frame Double Crank Power Press

Product Description

This JH25 C frame double crank press is the commonly used product in blanking, piercing and cutting the large piece of sheet metal. The worktable in large size is more suitable for the progressive dies working on different stations, increasing the production efficiency.

This machine chooses the six faced rectangular guide rails so as to enhance the punching precision. It also gets double crankshafts laid in the front and rear parts respectively connected to the slide via two link rods successfully. The reverse movement of the crankshaft increases the synchronization of the slide. In addition, the press is designed with the capacity ranging from 110 ton to 315 ton.

Feedback Form
Other Products
  • H-Frame Double Crank Punch PressApart from the same parts as the JH25 C frame double crank press has, this JH36 semi straight side double crank press also adopts the wet type clutch and brake, D frame that has a stronger welded body than the C frame.
  • H-Frame Double Crank Power PressThis JW36 straight side double crank press is designed with a strong H frame. The enclosed wet clutch with high torque needs minimal maintenance and it can get ride of the noise and pollution caused by airborne particles, significantly extending the lining life. Our machine is structured by symmetrical front and rear columns, minimizing the deflection so as to suit the precise progressive die applications. Without inherent deflection on angle, the structure ...